Anthem AVM 50 Manuel d'utilisateur télécharger pdf (Page 16)

2.1 VIDEO CONNECTIONS

To configure inputs, see section 3.6 and to configure video outputs see section 3.1.

HDMI:

Video is sent with audio from source components to the processor. Maximum video resolution is 1080p/60.

Connect MAIN HDMI output to a display with HDMI or DVI input – one with High-bandwidth Digital Content

Protection (HDCP) is required to display copy-protected material. DVD players usually enable HDCP even on

home movies. If the source is protected, only HDMI video output is active (see section 4.14).

Component Video (analog):

Component video uses three coaxial cables and has a maximum resolution of 1080p when unprocessed or

480p when the source material is copy-protected with Macrovision. AVM 50 only: Maximum input resolution

is 1080i/60 if the input is processed or converted to HDMI. The second Component output can be used in

MAIN, processed or unprocessed, or in ZONE2. AVM 40 only: Maximum input resolution is 1080i/60 if the

input is converted to HDMI. The second Component output can be used in MAIN or ZONE2.

S-Video (analog):

Maximum resolution is 480i (NTSC) / 576i (PAL). This connection keeps brightness and color separate for a

better picture than Composite. AVM 50 only: S-Video input can be converted to Component and HDMI output

(MAIN only). AVM 40 only: S-Video input can be converted to HDMI output (MAIN only).

Composite Video (analog):

Maximum resolution is 480i (NTSC) / 576i (PAL). This traditional format combines the black/white and color

information for transmission on a single coaxial cable. To be displayed, the information has to be separated,

a process that degrades video quality. Composite inputs can not be converted or processed. If you use a

VCR, one with S-Video output is recommended. If a composite video source is black and white, it can be

plugged into a Component video’s Y input. If there is no choice but to convert a color source’s composite

output, a composite to S-Video converter

is needed (not an adapter turned backwards).

2. CONNECTIONS

HDMI switching requires

at least two seconds per

stage, i.e. at least four

seconds from source to

processor to display.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 101 102

Pas de commentaire

Anthem AVM 50 Manuel d'utilisateur Page 16